 |
As part of TOSHIBA TEC's continuing commitment to new technology available soon will be the ability to encode
RFID chips using the B-SX series printers.
To be able to meet the various standards and frequencies Toshiba TEC is offering the unique ability to use
different readers and antenna on the same model. Initially two modules will be available but other read / writers
can be integrated easily.
General specification of B-SX RFID kit
- Supported RFID tag type:
| |
North America |
| Frequency |
915MHz |
| Protocol |
EPC Class0, Class1 and GEN2 |
| Power |
10 - 100mW |
- Resolution:
200dpi/B-SX4T, 300dpi/B-SX5T
- Maximum print area:
Width: 104mm/B-SX4T 127mm/B-SX5T
Length: 1498mm/B-SX4T 1498mm/B-SX5T
- Maximum print speed:
10ips/B-SX4T, 8ips/B-SX5T
Features for RFID
- Head Up function “H.I.P.TM” (available on the B-SX4T if the ribbon save module is fitted)
Reducing damage to the chips during printing.
Using Toshiba TEC's Ribbon save technology the print head can be raised to allow it to skip the RFID chip
contained in the label. This unique function removes the possibility of impact or pressure damage to both
the head and the chip. The end result of which is the continued long life of the printhead and fewer chip
failures after printing.
- Basic Command Interpreter:
This is Toshiba TEC's powerful user programmable interface. Using this it is possible
to use other RFID R/W modules with the B-SX series printer to extend the frequencies and chips available.
It also allows the possibility to uniquely tailor the programming of the chips to your exact
requirements.
- Compliance with TEC Printer Command Language (TPCL):
The RFID function have been added to the existing TPCL control language making it easy
for programmers on legacy systems to add this function to existing systems.
- Windows Driver:
The Printer driver will also support the RFID function allowing chips to be encoded
from most Windows applications.
|
|